MLW RS-23ROSTER | ||||
Reformatted: 22 October 2020 | Photograph by : xxxxxxx | |||
- | Info from : R.Craig | |||
Original owner | Road Numbers | Qty. | Bldr Numbers | Bldr Dates |
Canadian Pacific | 8013 | 1 | 82476 | 8/1959 |
8014 - 8031 | 18 | 82566-82583 | 8-9/1959 | |
8041 | 1 | 83303 | 7/1960 | |
8042 - 8046 | 5 | 83284-83302 | 3/1960 | |
Sydney & Louisburg | 200 - 202 | 3 | 83289-83291 | 8/1960 |
Texas Gulf Sulphur | 051 - 053 | 3 | 3457-01 to 03 | 7,9/1960 |
Source of information: The Diesel Builders, (volume 2), by John F. Kirkland | ||||
RS-23 Technical Data |
||||
Data Sheet Compiled by: Jean-Denis Bachand | Drawing by: Jacques Belanger | |||
- | ||||
Engine: Dominion Engineering 4-cycle Model 251D-6L | >Horsepower: 1000 | |||
Bore & Stroke: 9" X 10.5" | RPM (Maximum / Minimum): 1025 / 375 | |||
Gear Ratio: 74:18 ( Speed 60 mph) | Weight: 246,510 lbs | |||
Trucks: Two 4-Wheel (B-B) | Traction Motors: GE 752(four) | |||
Tractive Effort (starting) 58,750 lbs @ 25% | Tractive Effort (continuous): 42,000 lbs @ 8 mph | |||
Multiple Unit Capability: Yes | Dynamic Braking: yes/td> | |||
Main Generator: GE - GT740 | Auxilary Generator: GE GMG139 | |||
Air Brake: Westinghouse: 26L | Compressor: Westinghouse: 3CDC | |||
Quantity Built: 57 | Dates: 8/559 to 9/80 | |||
- | ||||
Total Length: 46'-03" | Pilot to Pilot: 37'-03" | |||
Truck Wheel Base: 9'-04" | Wheel Diameter: 40" | |||
Height to Top Engine Hood: 13'-09" | Height to Top Cab Roof: 15'-02 | |||
Cab Width: 10'-00" | Engine Hood Width: 5'-05" | |||
Distance between Truck Centers: 26'-03" | Center Bolster: 22'-03" | |||
Minimum Turning Radious | 21 degrees | |||
- | ||||
Fuel Oil: 950 | Lubricating Oil: 90 | |||
Engine Cooling Water: 120 | Sand Capacity: 27 cu. ft. | |||
Options:
| ||||
- | ||||
Drawing of RS23 by: Jacques Belanger | ||||
Reference Sources:
New: 2 April 2005 |